SPC026 2-Wire™ Speech Unit
The Digitalker® lift speech announcer is the voice of the lift industry and speaks volumes about the quality of Drucegrove products. Our SPC026 lift speech unit is available to connect directly to the 2-Wire™ bus and announce pre-programmed messages in a high quality natural voice using a digital playback system. Digitally mastered - all Drucegrove speech announcements are recorded by professional voice artists in a professional studio.
- Compatible with the Drucegrove 2-Wire™ system such that it literally plugs and plays.
- Compact Flash memory card contains a standard announcement library.
- Plays up to four separate language announcements consecutively.
- Time delay, repeat, auto-trigger and conditional transfer announcement options.
- Can randomly select from up to 4 predetermined voice artists for each new announcement.
- Configured to the customer’s order specification but reprogrammable by editing a simple configuration text file.
Other connectivity options are available. For more information, please view our Digitalker® Speech Unit page.
The SPC026 2-Wire™ speech unit is simple to install and is compatible with the Drucegrove 2-Wire™ System, avoiding the need for local power supplies, or expensive screened or twisted pair cables. The speech unit can be connected to other 2-Wire products in a "daisy chain" connection down the lift shaft, and additional 2-Wire branches can be added to the network, from a landing or the lift car, retrospectively.
Inputs are configured, and both power and data are provided via the Drucegrove 2-Wire System, therefore a Drucegrove 2-Wire IND055 Master Interface must be ordered for each lift.
The speech unit can be mixed with other 2-Wire products on the same bus, including the DragonFly™ multimedia TFT displays, FireFly™ TFT indicators, dot matrix and segment LED indicators, gongs and more.
As with all Drucegrove products, the Digitalker® speech units are fully supported by the in-house design engineers. Our engineers are available to offer free telephone and email support.
Telephone: +44 (0) 1992 650486 and select option 3 for Technical Support.
The following part numbers are for the Digitalker® speech unit to connect to a Drucegrove 2-Wire system:
2-Wire Digitalker Speech Unit with Standard Program and Speaker
2-Wire Digitalker Speech Unit with Standard Program and Speaker (Car Roof Mounting)
2-Wire Digitalker Speech Unit with Site Specific Program and Speaker
2-Wire Digitalker Speech Unit with Site Specific Program and Speaker (Car Roof Mounting)
2-Wire Digitalker Speech Unit with Audio Line TX (Machine Room Mounting) and Speaker
2-Wire Digitalker Speech Unit with Inductive Loop Amp, PSU and Speaker