TFT List Position Indicators

Drucegrove’s TFT300 FireFly™ Series offer 4.3”, 5.7" & 7.0" full colour screens giving TFT indicators with a simple, ultra-modern and versatile display. Using the latest TFT technology the display has an unparalleled viewing angle, with virtually no loss of colour or contrast at almost any angle.

  • Connects to Drucegrove 2-Wire™ system for lift position and status data
  • OTIS® Serial Data compatibility option
  • Available with an integrated 4.3”, 5.7” or 7.0” display as standard
  • Vandal Resistant option which meets EN81-71 Category 2
  • Meets elevated temperature requirement for EN81-72 fire fighting lifts as standard
  • Low profile, with remote display option to fit in a shallow surface mounted fixture
  • Every indicator is programmed to the same standard configuration
  • Contains 16 simple dipswitch selectable screen layouts and 8 dipswitch selectable theme colours
  • Displays full screen image based lift messages from standard built-in library of over 200 images
  • Displays alphanumeric floor designations with current and intended lift direction arrows
  • Dipswitch selectable lift car or landing position address, which can be set on the fly
  • Dipswitch selectable landscape or portrait orientation, which can be changed on-the-fly
  • Optional built in gong
  • Up and down outputs for driving additional external LED arrows

 

FireFly™ is low profile and incorporates an on-board gong and outputs for separate hall lanterns. Pre-programmed to a standard configuration with on board options means that FireFly™ is powerful but completely interchangeable, a stockable product with no need for factory re-programming. Dipswitch options include colour, layout, landscape/portrait orientation, and more.

The TFT300 Series indicators can display any two-character alpha-numeric floor designation, and are pre-loaded with a library of over 200 full screen pictogram messages as standard. Floor designations and message images are easily reconfigured on site from the Drucegrove IND55 2-Wire™ controller interface.

 

Lift Connectivity

The FireFly™ indicator is simple to install and is compatible with the Drucegrove 2-Wire™ System, avoiding the need for local power supplies, or expensive screened or twisted pair cables. Each comes with loop in/out terminals for easy installation in a “daisy chain” down the lift shaft. Additional branches can be added to expand the network later.

The FireFly™ can be mixed with other 2-Wire products on the same bus, including the DragonFly™ multimedia TFT displays, dot matrix and segment LED indicators, gongs, speech announcers and more.

The TFT300 Series can also be connected directly to an OTIS® lift with an RSL bus via either an OTIS® Remote Station or the Drucegrove DEC100 interface. The display will then automatically respond to Otis® floor designation characters, car direction, car overloaded and emergency messages.

 

 

Mountings, Fixings & Housings

We can supply the FireFly with a flush mount faceplate and back box, or a surface mount fixture, complete with a lens and any mountings and faceplates needed for fitting on the landings or inside your lift cars. Our in-house metalwork facilities include laser cutting, CNC bending, welding and engraving which allows us to supply the indicators ready for mounting in almost any location with a professional finish and minimal hassle.

Vandal Resistant FireFly™

The FireFly™ can be supplied in with a thicker polycarbonate lens and associated mounting brackets for spacing it off from the TFT screen to comply with category 2 of EN81-71:2005 for vandal resistance.

Drucegrove can also supply vandal resistant surface mount fixtures to meet the same specification.

Technical Support

As with all Drucegrove products, the FireFly™ screens are fully supported by the in-house design engineers. Our engineers are available to offer free telephone and email support.

Telephone: +44 (0) 1992 650486 and select option 3 for Technical Support.
Email: technicalsupport@drucegrove.com

 

Part Numbers

The following part numbers are for FireFly™ TFT screens to connect to a Drucegrove 2-Wire system:

TFT343-TXS-K001

2-Wire 4.3" FireFly™ TFT with 2.5mm Lens

TFT343-TGS-K002

2-Wire 4.3" FireFly™ TFT with Gong and 2.5mm Lens

TFT343-TXV-K001

2-Wire 4.3" FireFly™ TFT (Vandal Resistant) with 2.5mm Lens

TFT343-TGV-K002

2-Wire 4.3" FireFly™ TFT (Vandal Resistant) with Gong and 2.5mm Lens

TFT357-TXS-K001

2-Wire 5.7" FireFly™ TFT with 2.5mm Lens

TFT357-TGS-K002

2-Wire 5.7" FireFly™ TFT with Gong and 2.5mm Lens

TFT357-TXV-K001

2-Wire 5.7" FireFly™ TFT (Vandal Resistant) with 2.5mm Lens

TFT357-TGV-K002

2-Wire 5.7" FireFly™ TFT (Vandal Resistant) with Gong and 2.5mm Lens

TFT370-TXS-K001

2-Wire 7.0" FireFly™ TFT with 2.5mm Lens

TFT370-TGS-K002

2-Wire 7.0" FireFly™ TFT with Gong and 2.5mm Lens

TFT370-TXV-K001

2-Wire 7.0" FireFly™ TFT (Vandal Resistant) with 2.5mm Lens

TFT370-TGV-K002

2-Wire 7.0" FireFly™ TFT (Vandal Resistant) with Gong and 2.5mm Lens

 

The following part numbers are for FireFly™ TFT screens to connect to OTIS® Serial Data:

TFT343-SXS-K001

OTIS® Compatible 4.3" FireFly™ TFT with 2.5mm Lens

TFT343-SGS-K002

OTIS® Compatible 4.3" FireFly™ TFT with Gong and 2.5mm Lens

TFT343-SXV-K001

OTIS® Compatible 4.3" FireFly™ TFT (Vandal Resistant) and 2.5mm Lens

TFT343-SGV-K002

OTIS® Compatible 4.3" FireFly™ TFT (Vandal Resistant) and Gong and 2.5mm Lens

TFT357-SXS-K001

OTIS® Compatible 5.7" FireFly™ TFT with 2.5mm Lens

TFT357-SGS-K002

OTIS® Compatible 5.7" FireFly™ TFT with Gong and 2.5mm Lens

TFT357-SXV-K001

OTIS® Compatible 5.7" FireFly™ TFT (Vandal Resistant) and 2.5mm Lens

TFT357-SGV-K002

OTIS® Compatible 5.7" FireFly™ TFT (Vandal Resistant) and Gong and 2.5mm Lens

TFT370-SXS-K001

OTIS® Compatible 7.0" FireFly™ TFT with 2.5mm Lens

TFT370-SGS-K002

OTIS® Compatible 7.0" FireFly™ TFT with Gong and 2.5mm Lens

TFT370-SXV-K001

OTIS® Compatible 7.0" FireFly™ TFT (Vandal Resistant) and 2.5mm Lens

TFT370-SGV-K002

OTIS® Compatible 7.0" FireFly™ TFT (Vandal Resistant) and Gong and 2.5mm Lens

View desktop version