IND100 Series LED Segment Position Indicators

Our IND100 Series of 2-Wire of lift indicators are specially designed to operate with the Drucegrove 2-Wire system and eliminate the need for more than two expensive screened or twisted pair cables for their installation. Available in red, green, blue or white displays, our segment lift indicators are an adaptable, compact, self-contained unit.

Available as either 2×0.5”, 2×1.0”, 2×2.2”, 3×2.2” or 4×2.2” display sizes, all of our 2.2” segment lift indicators are ADA & DDA compliant. The 2.2” indicators may either be supplied with all tiles as 16-segment characters, or with the left-most character substituted for a direction arrow that shows the current lift travelling direction.

  • Connects to Drucegrove 2-Wire™ system for lift position and status data
  • Available in either red, green, blue or white
  • Available as 0.5” tile height with two 14-segment character tiles and two LED arrows.
  • Available as 1.0” tile height with two 16-segment character tiles and two LED arrows.
  • Available as 2.2” tile height with either 2, 3 or 4 tiles, where the left-most tile may either be an arrow or a 16-segment character
  • Displays alphanumeric floor designations with current lift direction arrows (where an arrow tile is fitted)
  • Dipswitch selectable lift car or landing position address, which can be set on the fly
  • Up and down outputs for driving additional external LED arrows

 

Lift Connectivity

The IND100 series segment indicators are simple to install and are compatible with the Drucegrove 2-Wire™ System, avoiding the need for local power supplies, or expensive screened or twisted pair cables. Each indicator comes equipped with two pairs of power in/out terminals, to enable installation in a "daisy chain" connection down the lift shaft, and additional 2-Wire branches can be added to the network, from a landing or the lift car, retrospectively.

Inputs are configured, and both power and data are provided via the Drucegrove 2-Wire System, therefore a Drucegrove 2-Wire IND055 Master Interface must be ordered for each lift.

The segment indicator can be mixed with other 2-Wire products on the same bus, including the DragonFly™ multimedia TFT displays, FireFly™ TFT indicators, dot matrix LED indicators, gongs, speech announcers and more.

 

Mountings, Fixings & Housings

We can supply the segment indicators with a flush mount faceplate and back box, or a surface mount fixture, complete with a lens and any mountings and faceplates needed for fitting on the landings or inside your lift cars. Our in-house metalwork facilities include laser cutting, CNC bending, welding and engraving which allows us to supply the indicators ready for mounting in almost any location with a professional finish and minimal hassle.

 

Technical Support

As with all Drucegrove products, the IND100 series segment indicators are fully supported by the in-house design engineers. Our engineers are available to offer free telephone and email support.

Telephone: +44 (0) 1992 650486 and select option 3 for Technical Support.
Email: technicalsupport@drucegrove.com

Part Numbers

The following part numbers are for segment indicators with 0.5” or 1.0” high character tiles:

IND100-RAR-A001

2 × 0.5" Red 14-Segment 2-Wire Indicator with Red Arrows

IND100-RAR-K002

2 × 0.5" Red 14-Segment 2-Wire Indicator with Red Arrows and 2.5mm Lens

IND110-RAR-A001

2 × 1.0" Red 16-Segment 2-Wire Indicator with Red Arrows

IND110-RAR-K002

2 × 1.0" Red 16-Segment 2-Wire Indicator with Red Arrows and 2.5mm Lens

IND110-GAG-A001

2 × 1.0" Green 16-Segment 2-Wire Indicator with Green Arrows

IND110-GAG-K002

2 × 1.0" Green 16-Segment 2-Wire Indicator with Green Arrows and 2.5mm Lens

IND110-BAB-A001

2 × 1.0" Blue 16-Segment 2-Wire Indicator with Blue Arrows

IND110-BAB-K002

2 × 1.0" Blue 16-Segment 2-Wire Indicator with Blue Arrows and 2.5mm Lens

IND110-WAW-A001

2 × 1.0" White 16-Segment 2-Wire Indicator with White Arrows

IND110-WAW-K002

2 × 1.0" White 16-Segment 2-Wire Indicator with White Arrows and 2.5mm Lens

The following part numbers are for segment indicators with 2.2” high red character tiles:

IND120-RCR-A001

1 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Red Arrow

IND120-RCR-K002

1 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Red Arrow and 2.5mm Lens

IND120-RCG-A001

1 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Green Arrow

IND120-RCG-K002

1 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Green Arrow and 2.5mm Lens

IND120-RCB-A001

1 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Blue Arrow

IND120-RCB-K002

1 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Blue Arrow and 2.5mm Lens

IND120-RCW-A001

1 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" White Arrow

IND120-RCW-K002

1 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" White Arrow and 2.5mm Lens

IND120-RAX-A001

2 × 2.2" Red 16-Segment 2-Wire Indicator

IND120-RAX-K002

2 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5mm Lens

IND130-RAR-A001

2 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Red Arrow

IND130-RAR-K002

2 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Red Arrow and 2.5mm Lens

IND130-RAG-A001

2 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Green Arrow

IND130-RAG-K002

2 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Green Arrow and 2.5mm Lens

IND130-RAB-A001

2 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Blue Arrow

IND130-RAB-K002

2 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Blue Arrow and 2.5mm Lens

IND130-RAW-A001

2 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" White Arrow

IND130-RAW-K002

2 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" White Arrow and 2.5mm Lens

IND130-RGX-A001

3 × 2.2" Red 16-Segment 2-Wire Indicator

IND130-RGX-K002

3 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5mm Lens

IND140-RGR-A001

3 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Red Arrow

IND140-RGR-K001

3 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Red Arrow and 2.5mm Lens

IND140-RGG-A001

3 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Green Arrow

IND140-RGG-K001

3 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Green Arrow and 2.5mm Lens

IND140-RGB-A001

3 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Blue Arrow

IND140-RGB-K001

3 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" Blue Arrow and 2.5mm Lens

IND140-RGW-A001

3 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" White Arrow

IND140-RGW-K001

3 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5" White Arrow and 2.5mm Lens

IND140-RKX-A001

4 × 2.2" Red 16-Segment 2-Wire Indicator

IND140-RKX-K001

4 × 2.2" Red 16-Segment 2-Wire Indicator with 2.5mm Lens

View desktop version